At present we are only offering the following types of seals for commercial refrigeration. We do plan on expanding this range in the near future, but will need to make moulds to enable the welding of these other profiles.
Our range of commercial Door Seals
FC501 (Most common commercial seal)
Most common commercial material used on a wide variety of commercial units.
FC505 (Push in commerical seal)
The FC505 is used in a wide range of commercial display doors. It pushes in to a plastic channel.
FC501 Inside Out (With flap)
This is one of the inside out profiles which has a flap that slides underneath from the inside of the door, rather than the traditional outer edge. Be sure to choose the correct profile between FD001 or FD002 (Found in domestic range) which has a small lip and is often hidden.
FD002 Inside Out (Attached with small lip)
Inside out profile which usually has the small lip undera metal part on the door. Seal is inserted from the inner edge rather than the traditional outer edge.
FC504
Profile for many skope and orford brand of commercial fridges
FC510
Used on Williams Fridges
FC503 (pushes in from side of door)
Use on mostly Iceblue fridges. Also seen on Gren
FC506 (Mostly used on Skopes.)
Mostly used on skope fridges.
FC508 (Used on skope fridges)
Mostly Used on Skope Fridges
FC507 (Used on Skope Display units)
Used on Skope Display units
FC509 (Used on Skope commercial units. Thick arrow head)
Used on Skope commercial units. Thick arrow head
FC501 (3 SIDED SEAL)
FC501 (3 SIDED SEAL) TOP & SIDES ONLY